A&S Company, World's Leading Supplier of Metal Detectors and Accessories.


A&S Company Phone: 1-800-301-6151
3209 Benton St. Fax: (408)241-7304
Santa Clara, CA 95051 USA
http://www.detection.com email: Here

Fisher M-Scope
Model 101
Rebar Locator and Metal Probe (metal Detector)



Features:


  • Detects all metals
  • Accurately pinpoints steel reinforcing bars, or rebars in concrete; (typically 8-9 depth for 0.5 inch diameter rebar)
  • Audio and visual indications of nearby metal
  • Rugged construction
  • Operates on universally available 9V batteries
  • Quick tune-ready for operation in seconds
  • Fully waterproof search loop
  • VLF=Very Low Frequency Operation

    The Fisher M-101 metal detector was designed especially for finding reinforcing bars , conduits, and other metal objects embedded in concrete. It also very effectively locates even the smallest metal items carried on or within a person, hence it is useful in security and military applications such as when searching prisoners prior to incarceration. The M-101 is substantially more sensitive that the average low cost metal detectors used at airports, so that a given metal item can be found at a greater distance from the search loop itself.

    Searches in water may be up to the connector at the control box. The search loop and cord are waterproof.


    Specifications:


    Operating Frequency of loop : 4.5 Khz
    Sensitivity: 0.2 mV RMS For Full Scale
    Sensitivity Adjustment Range: 12:1
    Output Indication: Meter-1 Milliamp, 1-100 Linear Scale. Speaker - 16 Ohm Impedance.
    Audio Output Frequency: 450 Khz
    Power Supply: -/+ 9V, (2) 9V NEDA 1604
    Search Loop Configuration Double D
    Weight: 2.8 Pounds, (1.3 Kg)
    Dimensions: Control box: 3 inch X 5 inch X 6 inch (8cm X 12 cm X 16 cm). Handle-0.75 X 23 inches (1.9 X 58.4 cm)
    Shipping Weight : 4 Pounds (1.8 Kg)
    Shipping Dimensions: 26.5 inch X 6.25 inch X 6.25 inch (67 X 13 X 16 cm).

    Applications


    The Model M-101 can locate reinforcing bar, conduit pipes, PK nails, wiring, wall studs or anything metallic.

    Ground And Visual Detection


    Pre-set circuit eliminates ground effects cause by highly mineralized materials and false signals due to loop movement.

    Audio And Visual Detection


    Wide View meter permits precise adjustment of penetration and definition of the metal target and precise location of intersections and mesh . The speaker indicates location of the target by emitting a strong signal that can be adjusted with the volume control. A headphone jack permits use of an optional headset.

    Quick Tune


    Turn the instrument on and only the penetration need be adjusted for most operations, allowing maximum penetration depth for metals
    Suggested Retail price for M-101 is $545

    A&S Company's price Please call 1-800-301-6151 and free UPS insured shipping in 48 states
    Please click here for other more advanced microprocessor controlled rebar locators




  • Back to Fisher Metal Detectors Main Page


  • Back to DetectionNet Main Page


  • Maintainer: DetectionNet, Email.
    All Rights Reserved.
    © Copyright 1996-2006 A&S Company